Skip to content

Dymax 38560 UV Curing Flood Bulb (400 W Hg Metal-Halide)

Broadband UV-A curing bulb for Dymax EC/ECE flood systems — 400 W

Dymax Corporation · US ● Manufacturer-confirmed

Key capabilities

  • Replacement lamp (external ballast)
  • Conventional (discharge)
  • Curing

At a glance

Product form
Replacement lamp (external ballast)
Technology
Conventional (discharge)
Application
Curing
Peak wavelength
320–450 nm

About this product

Dymax OEM replacement bulb 38560 for EC/ECE flood-curing systems (2000-EC/5000-EC). Mercury metal-halide arc, 400 W electrical, R7S/RX7 single-contact base. Broadband output weighted to UV-A + visible (~320-450 nm) — no single peak. Dopant element not named by the manufacturer → not specified (do not assume gallium). Spec: Dymax flood-lamp datasheet PDF; price: UVeBay (OEM-branded single unit).

Specifications

Lamp type
metal halide
Lamp wattage (nominal)
400 W
Manufacturer Part No.
38560

Specifications were provided by Dymax Corporation and have not been independently verified by LUVEX. Verified listings carry a Verified badge after our datasheet review.

Atlas · Explainer How a UV lamp is built → The anatomy of a low-pressure mercury lamp — envelope, electrodes, fill gas, base and ballast, component by component.

Data transparency

LUVEX shows what the manufacturer documented — and what is missing — and sanity-checks the figures. We never hide gaps; a complete, plausible listing simply ranks higher.

14%specced
Missing basics
  • socket/base
Not stated by the manufacturer
  • spectral doping not stated (spectrum unknown)
  • arc length not stated

Plan with Simulex

Will it cure your part?

Simulate the curing dose, working distance and illuminated area for your substrate before you buy — see whether a lamp delivers enough energy across your surface.

Open in Simulex

Compatible ballasts & cables

This is a bare replacement lamp — it needs external control gear.

No compatible ballasts or cables listed on LUVEX yet.

Compare with similar items

Same technology world and application — the specs that actually drive the buying decision, side by side.

SpecThis item Dymax 38560 UV Curing Flood Bulb (400 W Hg Metal-Halide) Dymax 38560 UV Curing Flood Bulb (400 W Hg Metal-Halide) Dymax Corporation $120 17% specced You are here Uvitron 400 W Metal-Halide Arc Lamp (UV0320) Uvitron 400 W Metal-Halide Arc Lamp (UV0320) Uvitron International $140 23% specced View → Uvitron UVA 600 W Flood Lamp (UV0834) Uvitron UVA 600 W Flood Lamp (UV0834) Uvitron International $213 23% specced View → Lesco LLB3032 Mercury UV Curing Bulb (6 in / 300 WPI) Lesco LLB3032 Mercury UV Curing Bulb (6 in / 300 WPI) American Ultraviolet Co. $517 20% specced View →
Peak wavelength320–450 nm320–400 nm316–400 nm200–450 nm
TechnologyConventional (discharge)Conventional (discharge)Conventional (discharge)Conventional (discharge)
Product formReplacement lamp (external ballast)Replacement lamp (external ballast)Replacement lamp (external ballast)Replacement lamp (external ballast)
Lamp wattage (nominal)400 W400 W600 W
Arc length152 mm
Spectral dopingUndoped (Hg)
CoolingAirAir
Ballast requiredYesYes

Specifications as listed by each manufacturer or public source — LUVEX does not rank products. A blank cell means that figure has not been provided yet. Verified listings and active partners are shown first; the table itself stays neutral.

Complete your setup

Equipment commonly used alongside this product — selected by type, not purchase tracking.

Request a quote

Send a direct request to Dymax Corporation for Dymax 38560 UV Curing Flood Bulb (400 W Hg Metal-Halide). They reply to you directly — LUVEX doesn't broker the deal or sit in on your conversation.

LUVEX facilitates contact only — no sales, no imports.